Protraction of Mandibular Second Molar for Substitution of Adjacent Missing First Molar With a Mini-Implant-Anchored Albert Loop Appliance.

Protraction of mandibular posterior teeth into edentulous regions is challenging in clinical practice. This case demonstrated a minor tooth movement of a mandibular second molar to substitute its adjacent missing first molar in a 15-year-old female. An efficient bodily movement of the mandibular second molar was achieved through a mini-implant-anchored protraction loop appliance. With this carefully designed biomechanical system, over 10-mm molar protraction was accomplished within 14 months without mesial or lingual tipping. The adjacent third molar erupted spontaneously during the protraction process and drafted mesially. Through brackets and segmented archwire after the protraction, the second and third molars were successfully protracted and good buccal interdigitation was achieved. The combination of the Albert protraction loop and mini-implant allows for more efficient protraction of the mandibular molars, avoiding mesial tipping and lingual rotation of the molars.

Evaluation of Optimal Insertion Sites and Angles for Orthodontic Mini-Implants at the Anterior Nasal Spine Region Based on Cone-Beam Computed Tomography.

BACKGROUND: To infer the optimal angulation and height level of mini-implant insertion in the anterior nasal spine (ANS) region from alveolar bone depth (BD) and labial cortical bone thickness (CBT) through cone-beam computed tomography (CBCT), the influences of sex, age, and growth pattern on BD, CBT, and the starting point of the ANS were examined. MATERIAL AND METHODS: BD and CBT were measured on CBCT median sagittal images at specific angles (0, 15, 30, 45, and 60 degrees) to simulate the angulation of insertion. The height level of the first axial image with obvious bone ridge was recorded as the start of ANS. RESULTS: The average height of ANS start was 9.42 mm from the alveolar bone crest between the central incisors. The variations in height level and insertion angle combined, or either of them individually, significantly influenced BD and CBT, demonstrating overall decreasing trends (p < 0.001). BD was not influenced by sex, age, or growth pattern (p > 0.05). However, CBT was found to be correlated with sex and growth pattern, while the height level of ANS start was associated only with growth pattern, particularly in hypodivergent patients (p < 0.05). CONCLUSION: The recommended insertion height level is 14-16 mm from the alveolar bone crest and the recommended angulation is 30-45°. An innovative inequity in the relationship between a certain height level and the insertion angulation is proposed.

Orthodontic Practitioners' Knowledge and Education Demand on Clear Aligner Therapy.

OBJECTIVES: Clear aligner therapy (CAT) has been gaining popularity amongst the orthodontic community. No systematic course on CAT has been reported to date. The objectives of this study were to determine practitioners' knowledge and to offer insights for future tailored courses on CAT. METHODS: An online questionnaire was distributed. The questionnaire comprised personal background information, predictability of tooth movement through CAT, and CAT knowledge that practitioners demanded to learn. Four senior expert orthodontists' answers to the predictability of tooth movement through CAT were averaged to be a standard reference. Descriptive statistics, 1-way analysis of variance (ANOVA), principal component analysis, Student t test, and multivariate logistics regression analysis were performed with significance set at P < .05. RESULTS: In total, 190 practitioners participated in this study. As compared to the standard reference, participants overestimated the predictability of difficult-to-be-achived tooth movements (eg, molar mesialisation; P < .0001). Strategy of managing troubleshooting cases and extraction cases ranked the highest CAT knowledge that participants requested to learn. Practice type, number of completed CAT cases, number of undergoing CAT cases, years of practice, education background, and time of using CAT were the influencing factors of the questions regarding the predictability of tooth movement through CAT and CAT knowledge that were demanded to be learned. CONCLUSIONS: The predictability of difficult-to-be-achieved tooth movement through CAT is often overestimated by practitioners with limited clinical experience. Tailored education on CAT, especially managing troubleshooting cases and extraction cases, should be designed for all practitioners.

Controllable synthesis of borophene aerogels by utilizing h-BN layers for high-performance next-generation batteries.

Borophene is emerging as a promising electrode material for Li, Na, Mg, and Ca ion batteries due to its anisotropic Dirac properties, high charge capacity, and low energy barrier for ion diffusion. However, practical synthesis of active and stable borophene remains challenging in producing electrochemical devices. Here, we introduce a method for borophene aerogels (BoAs), utilizing hexagonal boron nitride aerogels. Borophene grows between h-BN layers utilizing boron-boron bridges, as a nucleation site, where borophene forms monolayers mixed with sp2-sp3 hybridization. This versatile method produces stable BoAs and is compatible with various battery chemistries. With these BoAs, we accomplish an important milestone to successfully fabricate high-performance next-generation batteries, including Na-ion (478 mAh g-1, at 0.5C, >300 cycles), Mg-ion (297 mAh g-1, at 0.5C, >300 cycles), and Ca-ion (332 mAh g-1, at 0.5C, >400 cycles), and Li-S batteries, with one of the highest capacities to date (1,559 mAh g-1, at 0.3C, >1,000 cycles).

Characteristics of oral microbiota and oral health in the patients treated with clear aligners: a prospective study.

OBJECTIVES: In this prospective clinical study, the effect of clear aligners on periodontal health and oral hygiene was examined. As the same time, microbial changes of the aligner tray and subgingival microbiota community were investigated. METHODS: The study recruited fifteen patients, and clinical parameters were recorded at three different time points: before the initiation of aligner treatment (T0), 1 month after treatment onset (T1), and 3 months after treatment onset (T3). Plaque samples were collected from the inner surface of aligners and subgingival sulcus at each of these time points. The microbial composition of the samples was analyzed using 16S rRNA gene sequencing, and changes were evaluated based on the abundance of amplicon sequence variants (ASVs). RESULTS: Reduction in plaque index and improvement in periodontal health were observed. In aligner tray plaque samples, the relative abundance of Streptococcus increased significantly, as well as the richness and diversity of microbiota decreased substantially as the duration of treatment time. In subgingival plaque samples, alpha and beta diversity of microbiota did not change significantly. CONCLUSIONS: During the clear aligner treatment, the patients' periodontium remained in a healthy condition, and clear aligner treatment had no significant impact on the composition of subgingival microbiota. The structure of the aligner tray microbiota altered significantly at both phylum and genus levels and attracted a unique and less diverse microbiota community. CLABSINABSICAL RELEVANCE: Clear aligner treatment has no significant impact on periodontal health and subgingival microbiota composition of patients.

Myc-Associated Zinc Finger Protein Promotes Metastasis of Papillary Thyroid Cancer.

BACKGROUND: Myc-associated zinc finger protein (MAZ) plays a role in cancer progression and metastasis. However, the role and underlying molecular mechanism of MAZ in thyroid cancer have not yet been fully elucidated. This study aimed to explore the clinical significance of MAZ in thyroid cancer tissues, and clarify its mechanism in the occurrence and development of thyroid cancer. METHODS: The expression level of MAZ protein in thyroid cancer tissues was detected by bioinformatics analysis and immunohistochemistry (IHC). The relationship between the expression level of MAZ and clinicopathological characteristics of thyroid cancer patients was analyzed by multivariate logistic regression analysis. Quantitative reverse-transcription polymerase chain reaction (RT-qPCR) was used to detect the mRNA expression level of MAZ in thyroid cancer cell lines. After MAZ knockdown cell lines were constructed, wound healing and Transwell assays were used to detect the migratory and invasive abilities of cancer cells. RESULTS: The results of IHC showed that the expression level of MAZ protein in thyroid cancer tissues was higher than that in normal adjacent thyroid tissues (p < 0.05), which was consistent with the high expression level of MAZ in thyroid cancer tissues found in The Cancer Genome Atlas (TCGA) database. The results of multivariate logistic regression analysis indicated that the expression level of MAZ was correlated with tumor diameter and tumor capsule of thyroid cancer patients. Moreover, patients with the high MAZ expression level had shorter overall and disease-free survival compared with thyroid cancer patients with the low MAZ expression level (p < 0.05). Further cell function assays indicated that downregulation of MAZ expression level could inhibit the migration and invasion of thyroid cancer cell lines. Moreover, the expression level of epithelial-mesenchymal transition (EMT)-related factor fibronectin 1 (FN1) was obtained from the RNA-seq of MAZ knockdown in thyroid cancer cells. RT-qPCR confirmed that the expression level of FN1 was elevated in MAZ knockdown cell lines (p < 0.05). Bioinformatics analysis indicated that the expression level of FN1 was upregulated in thyroid cancer tissues and had a negative relationship with the expression level of MAZ, as evidenced by correlation analysis. CONCLUSIONS: A high expression level of MAZ in thyroid cancer tissues was associated with a poor prognosis of patients. MAZ could affect the progression of thyroid cancer by inducing the EMT process.

A seminested recombinase polymerase amplification assay to detect rickettsial pathogens in clinical samples.

Treatment at the early stage of onset is vital for the prognosis of rickettsioses. But the absence of specific clinical symptoms complicates the diagnosis of this condition. Herein we established a seminested recombinase polymerase amplification assay (snRPA-nfo) that enables quick detection and differentiation of rickettsial pathogens in clinical samples with high sensitivity and specificity. The conserved 17-kDa protein gene of Rickettsia sibirica and the 47-kDa protein gene of Orientia tsutsugamushi were targeted for the duplex RPA-nfo assay. The snRPA-nfo assay exhibited an increased LOD in spiked blood samples, up to 1000-fold in comparison to standard RPA-nfo, and a better detection rate (83.3%, 5/6) than TaqMan PCR (16.6%, 1/6, Ct ≤ 35) in clinically confirmed patient blood samples. Thus, snRPA-nfo assay represents a promising alternative to TaqMan PCR in the early diagnosis of rickettsioses for point-of-care testing as well as in resource-limited settings.

Effectiveness of clear aligners in achieving proclination and intrusion of incisors among Class II division 2 patients: a multivariate analysis.

BACKGROUND: The predictability of incisor movement achieved by clear aligners among Class II division 2 patients is poorly understood. The aim of this retrospective study was to determine the effectiveness of clear aligners in proclining and intruding upper incisors and its influencing factors. METHODS: Eligible patients with Class II division 2 malocclusion were included. For clear aligner therapy, three types of incisor movements were designed: proclination, intrusion and labial movement. Pre-treatment and post-treatment dental models were superimposed. The differences between predicted and actual (DPA) tooth movement of incisors were analyzed. Univariate and multivariate linear regression were used to analyze the potential influencing factors. RESULTS: A total of 51 patients and their 173 upper incisors were included. Actual incisor proclination and intrusion were less than predicted ones (both P < 0.001), while actual labial movement was greater than predicted one (P < 0.001). Predictability of incisor proclination and intrusion was 69.8% and 53.3%, respectively. Multivariate linear regression revealed that DPA of proclination was significantly positively associated with predicted proclination (B = 0.174, P < 0.001), ipsilateral premolar extraction (B = 2.773, P < 0.001) and ipsilateral canine proclination (B = 1.811, P < 0.05), while negatively associated with molar distalization (B = - 2.085, P < 0.05). The DPA of intrusion was significantly positively correlated with predicted intrusion (B = 0.556, P < 0.001) while negatively associated with labial mini-implants (B = - 1.466, P < 0.001). The DPA of labial movement was significantly positively associated with predicted labial movement (B = 0.481, P < 0.001), while negatively correlated with molar distalization (B = - 1.004, P < 0.001), labial mini-implants (B = - 0.738, P < 0.001) and age (B = - 0.486, P < 0.05). CONCLUSIONS: For Class II division 2 patients, predicted incisor proclination (69.8%) and intrusion (53.3%) are partially achieved with clear aligner therapy. Excessive labial movement (0.7 mm) of incisors may be achieved. Incisor movement is influenced by predicted movement amount, premolar extraction, canine proclination, molar distalization, mini-implants and age.

Radiographic Features of Mandibular Second Molars with Eruption Disturbances: A Retrospective Study.

We aimed to establish the characteristics and potential etiological risk factors of eruption disturbances in mandibular second molars (MM2). We retrospectively enrolled patients with eruption disturbances in MM2. A total of 143 MM2 with eruption disturbances from 112 patients (mean age 17.45 ± 6.35) were included in this study. Panoramic radiographs were employed to determine the risk factor, angulation type, impaction depth, tooth development stage, and associated pathology. The novel classification method of MM2 was based on impaction depth and angulation. Of 143 MM2, 137 and 6 were diagnosed with impaction and retention, respectively. Insufficient space was the most frequent risk factor for eruption disturbances. There were no significant differences between retention and impaction regarding sex, age, or side. The most frequent impaction type was Type I. The most frequent angulation of impacted MM2 was mesioangular. Impacted MM2 with shallower depth were more frequently associated with the presence of first molar undercut. Impaction types did not differ according to age, side, development stage, or distance from the MM1 distal surface to the anterior border of the ramus. Dentigerous cysts were associated with earlier MM2 development stages and greater MM2 depth. In conclusion, MM2 impaction types differed according to the risk factor, angulation type, MM1 undercut, and presence of cysts. Early MM2 development stage and greater MM2 depth were risk factors for MM2 eruption disturbances with cysts.

Impact of Clear Aligners on Oral Health and Oral Microbiome During Orthodontic Treatment.

The demand for clear aligners has risen over the past decade because they satisfy patients' desire for less noticeable and more comfortable orthodontic appliances. Because clear aligners are increasingly used in orthodontics, there is a big push to learn more about the physiologic and microbial changes that occur during treatment. The present work highlighted further links between clear aligners and changes in oral health and the oral microbiome and provided plaque control methods for clear aligner trays. Existing literature revealed that clear aligners have no significant influence on the structure of the oral microbiome during orthodontic therapy. Clear aligner treatment demonstrated promising results in terms of controlling plaque index, gingival health, and the prevalence of white spot lesions. Nevertheless, grooves, ridges, microcracks, and abrasions on the aligner surface would provide a prime environment for bacterial adherence and the development of plaque biofilms. A combination of mechanical and chemical methods seems to be a successful approach for removing plaque biofilm from aligners whilst also preventing pigment adsorption.

The effects of aligner anchorage preparation on mandibular first molars during premolar-extraction space closure with clear aligners: A finite element study.

INTRODUCTION: This study aimed to determine the effectiveness of different aligner anchorage preparations on mandibular first molars during premolar-extraction space closure with clear aligners and to assess the effects of different modes of Class II elastics on mandibular first molars. METHODS: Finite element models were constructed on the basis of cone-beam computed tomography data from an orthodontic patient. The models comprised maxilla, mandible, maxillary and mandibular teeth without first premolars, periodontal ligaments, attachments and aligners. Tooth displacement tendencies were calculated using different aligner anchorage preparations and Class II elastics on the models from the same patient. Three group sets were designed on the basis of the positions of aligner cutouts and buttons (mesiobuccal, distobuccal and lingual). Four groups were established in each of the 3 group sets. Four groups were created: (1) no elastic traction + no anchorage preparation, (2) anchorage preparation only, (3) elastic traction only, and (4) elastic traction + anchorage preparation. Different aligner anchorage preparations (0°, 1°, 2°, 3°) were applied on mandibular second premolars and molars. The Class II traction force was set to 100 g. RESULTS: With clear aligners, mandibular first molars were subject to mesial tipping, lingual tipping and intrusion. In the condition of no elastic traction, aligner anchorage preparation resulted in distal tipping, buccal tipping, and extrusion effect on mandibular first molars. Aligner anchorage preparation was more effective in the distal and lingual cutout groups than in the mesial cutout group. In the condition of Class II elastic traction, the bodily movement of mandibular first molars was achieved with a 3° anchorage preparation for the mesial cutout group and a 1.7° anchorage preparation for distal and lingual cutout groups. Absolute maximal anchorage was achieved with a 2° anchorage preparation for distal and lingual cutout groups. CONCLUSIONS: Clear aligner therapy caused mesial tipping, lingual tipping and intrusion of mandibular first molars during premolar-extraction space closure. Aligner anchorage preparation effectively prevented mesial and lingual tipping of mandibular molars. Distal and lingual cutout modes were more effective than mesial cutout modes in aligner anchorage preparation. For each aligner stage (0.25 mm), 1.7° aligner anchorage preparation and Class II elastics with distal or lingual cutouts led to the bodily movement of mandibular first molars, whereas 2° anchorage preparation reached absolute maximal anchorage.

The EDA/EDAR/NF-κB pathway in non-syndromic tooth agenesis: A genetic perspective.

Non-syndromic tooth agenesis (NSTA) is one of the most common dental developmental malformations affected by genetic factors predominantly. Among all 36 candidate genes reported in NSTA individuals, EDA, EDAR, and EDARADD play essential roles in ectodermal organ development. As members of the EDA/EDAR/NF-κB signaling pathway, mutations in these genes have been implicated in the pathogenesis of NSTA, as well as hypohidrotic ectodermal dysplasia (HED), a rare genetic disorder that affects multiple ectodermal structures, including teeth. This review provides an overview of the current knowledge on the genetic basis of NSTA, with a focus on the pathogenic effects of the EDA/EDAR/NF-κB signaling pathway and the role of EDA, EDAR, and EDARADD mutations in developmental tooth defects. We also discuss the phenotypic overlap and genetic differences between NSTA and HED. Ultimately, this review highlights the importance of genetic analysis in diagnosing and managing NSTA and related ectodermal disorders, and the need for ongoing research to improve our understanding of these conditions.

The value of next-generation metagenomic sequencing in pathogen detection of pleural effusions and ascites from children with sepsis.

Objective: To investigate the diagnostic value of metagenomic next-generation sequencing (mNGS) using pleural effusion and ascites from children with sepsis. Methods: In this study, children with sepsis or severe sepsis and appeared pleural or peritoneal effusions were enrolled, of whom the pleural effusions or ascites and blood samples were conducted pathogen detection using both conventional and mNGS methods. The samples were divided into pathogen-consistent and pathogen-inconsistent groups based on the consistency of mNGS results from different sample types, and into exudate and transudate groups based on their pleural effusion and ascites properties. The pathogen positive rates, pathogen spectrum, consistency between different sample types, and clinical diagnosis consistency were compared between mNGS and conventional pathogen tests. Results: A total of 42 pleural effusions or ascites and 50 other type samples were collected from 32 children. The pathogen positive rate of the mNGS test was significantly higher than that of traditional methods (78.57% vs. 14.29%, P < 0.001) in pleural effusion and ascites samples, with a consistent rate of 66.67% between the two methods. Nearly 78.79% (26/33) of mNGS positive results of the pleural effusions and ascites samples were consistent with clinical evaluation, and 81.82% (27/33) of these positive samples reported 1-3 pathogens. The pathogen-consistent group outperformed the pathogen-inconsistent group in terms of consistency with respect to clinical evaluation (88.46% vs. 57.14%, P = 0.093), while there was no significant difference between the exudate and transudate groups (66.67% vs. 50.00%, P = 0.483). Conclusion: Compared to conventional methods, mNGS has great advantages in pathogen detection of pleural effusion and ascites samples. Moreover, consistent results of mNGS tests with different sample types provide more reference values in clinical diagnosis.

Characteristics of Spatial Changes in Molars and Alveolar Bone Resorption among Patients with Loss of Mandibular First Molars: A CBCT-Based Morphometric Study.

OBJECTIVES: To investigate the characteristics of spatial changes in molars and alveolar bone resorption among patients with loss of mandibular first molars. METHODS: A total of 42 CBCT scans of patients with missing mandibular first molars (3 males, 33 females) and 42 CBCT scans of control subjects without loss of mandibular first molars (9 males, 27 females) were evaluated in this cross-sectional study. All images were standardized using the mandibular posterior tooth plane with Invivo software. The following indices regarding alveolar bone morphology were measured, including alveolar bone height, bone width, mesiodistal and buccolingual angulation of molars, overeruption of maxillary first molars, bone defects, and the capability of molar mesialization. RESULTS: The vertical alveolar bone height in the missing group was reduced by 1.42 ± 0.70 mm, 1.31 ± 0.68, and 1.46 ± 0.85 mm on the buccal, middle, and lingual side, respectively (no differences among the three sides; p > 0.05). Alveolar bone width was reduced the greatest at the buccal CEJ level and the least at the lingual apex level. Mandibular second molar mesial tipping (with mean of the mesiodistal angulation = 57.47 ± 10.34°) and lingual tipping (with mean of the buccolingual angulation = 71.75 ± 8.34°) were observed. The mesial and distal cusps of maxillary first molars were extruded by 1.37 mm and 0.85 mm, respectively. Buccal and lingual defects of alveolar bone occurred at the CEJ, mid-root, and apex levels. Through 3D simulation, the second molar cannot be successfully mesialized into the missing tooth position, and the difference between the available and required distances for mesialization was the greatest at the CEJ level. The duration of tooth loss was significantly correlated with the mesio-distal angulation (R = -0.726, p < 0.001), buccal-lingual angulation (R = -0.528, p < 0.001) and the extrusion of the maxillary first molar (R = -0.334, p < 0.05). CONCLUSION: Both vertical and horizontal resorption of alveolar bone occurred. Mandibular second molars exhibit mesial and lingual tipping. Lingual root torque and uprighting of the second molars are needed for the success of molar protraction. Bone augmentation is indicated for severely resorbed alveolar bone.

Association of Body Mass Index (BMI) with Lip Morphology Characteristics: A Cross-Sectional Study Based on Chinese Population.

BACKGROUND: Lip morphology is essential in diagnosis and treatment of orthodontics and orthognathic surgery to ensure facial aesthetics. Body mass index (BMI) has proved to have influence on facial soft tissue thickness, but its relationship with lip morphology is unclear. This study aimed to evaluate the association between BMI and lip morphology characteristics (LMCs) and thus provide information for personalized treatment. METHODS: A cross-sectional study consisted of 1185 patients from 1 January 2010 to 31 December 2020 was conducted. Confounders of demography, dental features, skeletal parameters and LMCs were adjusted by multivariable linear regression to identify the association between BMI and LMCs. Group differences were evaluated with two-samples t-test and one-way ANOVA test. Mediation analysis was used for indirect effects assessment. RESULTS: After adjusting for confounders, BMI is independently associated with upper lip length (0.039, [0.002-0.075]), soft pogonion thickness (0.120, [0.073-0.168]), inferior sulcus depth (0.040, [0.018-0.063]), lower lip length (0.208, [0.139-0.276]), and curve fitting revealed non-linearity to BMI in obese patients. Mediation analysis found BMI was associated with superior sulcus depth and basic upper lip thickness through upper lip length. CONCLUSIONS: BMI is positively associated with LMCs, except for nasolabial angle as negatively, while obese patients reverse or weaken these associations.

The effect of antibiotics on the periodontal treatment of diabetic patients with periodontitis: A systematic review and meta-analysis.

Background: The aim of this meta-analysis was to compare the effects of periodontal treatment with or without adjunctive antibiotic on periodontal status and blood glucose level in diabetic patients with periodontitis. Methods: A search using electronic database (MEDLINE, EMBASE, and Cochrane Central Register of Controlled Trials) and a manual search were performed up to July 2022. Eligible 13 RCTs were included according to inclusion and exclusion criteria. Reviewers independently performed data screening, data selection, data extraction, and risk of bias. Quality assessment was performed according to the Cochrane Handbook for Systematic Reviews of Interventions. Weighted mean differences and 95% confidence intervals (CIs) for continuous outcomes were calculated using random or fixed-effects models. This review is registered in the PROSPERO database (CRD42022347803). Results: Of the 13 included articles, eight were on the use of systemic antibiotics and five on topical antibiotics. The results showed statistically significant improvement in periodontal status (probing depth, clinical attachment loss and bleeding on probing) at 6 months with systematic antibiotics use (PD-6M p = 0.04, BOP-6M p < 0.0001, CAL-6M p = 0.002). The improvement in PD with topical antibiotics was statistically significant at 1 month (p = 0.0006). However, there was no statistically significant improvement in periodontal status at 3 months with adjuvant systemic antibiotics. Conclusion: Antibiotics can improve the periodontal condition of diabetic patients with periodontitis to a certain extent. In clinical practice, it is necessary to comprehensively consider the balance of benefits and risks before deciding whether to use antibiotics. Systematic Review Registration: Identifier CRD42022347803, https://www.crd.york.ac.uk/PROSPERO/.

Comparison of three-dimensional maxillary growth across spheno-occipital synchondrosis maturation stages.

BACKGROUND: This study aimed to three-dimensionally compare the maxillary growth among the spheno-occipital synchondrosis (SOS) maturation stages in both genders. METHODS: This is a cross-sectional study of a retrospective type in which cone-beam computed tomography (CBCT) images of 500 patients aged 6 to 25 years (226 males and 274 females) were analyzed. The SOS was evaluated using the four-stage scoring system; completely open, partially fused, semi-fused, or completely fused. The SOS scoring and three-dimensional cephalometric measurements were analyzed by Invivo 6.0.3 software. Descriptive and analytical statistics were performed and a P-value < 0.05 was considered statistically significant. RESULTS: There was a statistically significant difference in maxillary measurements among SOS maturation stages in both genders (P < 0.05). The mean differences in the maxillary growth among the SOS maturation stages between SOS stages 2 and 3 were higher than those between stages 1and 2 and stages 3 and 4 for maxillary length and height in both genders. However, the mean difference in the maxillary width was higher between SOS stages 1 and 2 than those stages 2 and 3 and stages 3 and 4. On other hand, there may be lesser maxillary growth between SOS stages 3 and 4 for maxillary width, length (in males), and height. The growth curves showed high active growth of the maxilla as the SOS was still fusing (especially stage 2 and 3) than those of the fused (stage 4). Moreover, the acceleration of growth occurred earlier in females than males regarding chronological age but not for SOS maturation stages. CONCLUSIONS: The SOS maturation stages are valid and reliable maxillary skeletal maturation indicators for three-dimensional maxillary growth in both genders.

Artificial intelligence-assisted determination of available sites for palatal orthodontic mini implants based on palatal thickness through CBCT.

OBJECTIVES: To develop an artificial intelligence (AI) system for automatic palate segmentation through CBCT, and to determine the personalized available sites for palatal mini implants by measuring palatal bone and soft tissue thickness according to the AI-predicted results. MATERIALS AND METHODS: Eight thousand four hundred target slices (from 70 CBCT scans) from orthodontic patients were collected, labelled by well-trained orthodontists and randomly divided into two groups: a training set and a test set. After the deep learning process, we evaluated the performance of our deep learning model with the mean Dice similarity coefficient (DSC), average symmetric surface distance (ASSD), sensitivity (SEN), positive predictive value (PPV) and mean thickness percentage error (MTPE). The pixel traversal method was proposed to measure the thickness of palatal bone and soft tissue, and to predict available sites for palatal orthodontic mini implants. Then, an example of available sites for palatal mini implants from the test set was mapped. RESULTS: The average DSC, ASSD, SEN, PPV and MTPE for the segmented palatal bone tissue were 0.831%, 1.122%, 0.876%, 0.815% and 6.70%, while that for the palatal soft tissue were 0.741%, 1.091%, 0.861%, 0.695% and 12.2%, respectively. Besides, an example of available sites for palatal mini implants was mapped according to predefined criteria. CONCLUSIONS: Our AI system showed high accuracy for palatal segmentation and thickness measurement, which is helpful for the determination of available sites and the design of a surgical guide for palatal orthodontic mini implants.

Selenium-decorated biocompatible honeycomb films with redox-switchable surface for controlling cell adhesion/detachment.

HYPOTHESIS: Selenium (Se)-containing compound is sensitive to redox stimulation, showing hydrophobic-hydrophilic reversible transition. Introduction of such compound into honeycomb film could confer on it redox-switchable surface wettability, which is expected to control cell adhesion/detachment behavior. EXPERIMENTS: Didodecyl selenide was designed and mixed with polystyrene to prepare honeycomb films using "breath figure" method. The film microstructures were characterized by scanning electron microscope and atomic force microscopy, and the arrangement of Se atoms in honeycomb film was determined by X-ray photoelectron spectroscopy and energy dispersive spectrometry. The variation of film wettability upon the alternating stimulation of H2O2 and Vc was examined. Then the cell adhesion, proliferation, and controlled detachment on honeycomb films were conducted. FINDINGS: The introduction of didodecyl selenide helps to form ordered honeycomb film, and Se atoms were found to located on the bottom, pore walls, and top surface of the film. The presence of didodecyl selenide not only greatly improves film biocompatibility by enhancing cell thioredoxin reductase activity, but also imparts the film with H2O2-/vitamin C-regulated tunable wettability that controls cell adhesion and detachment. H2O2 treatment produces a hydrophilic surface for cell adhesion and proliferation, whereas the addition of vitamin C generates hydrophobic surfaces and allows cells to detach while remaining alive with high activity.

Simulation and experimental study on the degradation of the greenhouse gas SF6 by thermal plasma.

SF6 gas is widely used on many occasions especially in the power equipment, but it has been restricted since Kyoto Protocol as the strongest greenhouse gas. To reduce the SF6 emission, several methods are now used such the recycling & purification and the SF6 degradation. Considering the huge market of SF6 and the recent demand in the field of power equipment, it is necessary to explore new ways to thoroughly destroy SF6. This work brought out the idea to degrade retired SF6 by thermal plasma. A simplified kinetic model was established to predict the feasibility of this idea as well as the degradation products of SF6, and then the prototype of SF6 degradation by thermal plasma was built and tested. In thermal plasma, SF6 gradually decomposed into atoms, and then H2 was added to capture the released F atoms to generate HF and also prevent the association reactions of SF6. In order to achieve the desired degradation effect, the reaction temperature and the mixing ratio of H2 should be sufficiently high. However, excessive H2 could generate the H2S, and excessive discharge power could decrease the energy yield. When the flow rate of SF6/H2 was set as 8/30 L/min and the discharge current was set as 100A, the destruction removal efficiency (DRE) of SF6 was 99.0% and the energy yield was 206 g/kWh. This work also discusses how to further treat the by-products such as HF and S from this prototype effectively.